![Jory Dion](/img/default-banner.jpg)
- 80
- 742 752
Jory Dion
Приєднався 9 чер 2007
Mining and Tunneling videos.
The main idea is to educate people who are interested or new to the mining/tunneling industry.
Tutorials and walkthroughs with many different mining jobs, or just being able to see what actually goes on underground. Many mining terms are almost a foreign language to someone who has never seen or experienced underground life.
Even if you are experienced I hope to be able to provide some tricks of the trade that we can all use to help make our jobs better.
My work motto is - Safely .Quality. Efficiency in that order.
The main idea is to educate people who are interested or new to the mining/tunneling industry.
Tutorials and walkthroughs with many different mining jobs, or just being able to see what actually goes on underground. Many mining terms are almost a foreign language to someone who has never seen or experienced underground life.
Even if you are experienced I hope to be able to provide some tricks of the trade that we can all use to help make our jobs better.
My work motto is - Safely .Quality. Efficiency in that order.
How to hang vent with minimal tools and supplies
How to hang vent with minimal tools and supplies.
Переглядів: 631
Відео
jumbo drilling a round + 2 slashes narrated
Переглядів 5 тис.Рік тому
DD422i drilling a round and 2 slashes. I thought this video deserved some explanation, so here it is! spruced up the quality a bit also. Hope you enjoy!
Vent raise breakthrough teamwork
Переглядів 1,5 тис.Рік тому
Breaking into a vent raise and using multiple pieces of machinery to clean it up and advance
E2C with 7 meter rails!
Переглядів 767Рік тому
installing 6-meter bolts with 7-meter rail epiroc E2C! this video was lost on a recently recovered hard drive!
Day #3 Bolt - Drill - Blast
Переглядів 2,8 тис.2 роки тому
3rd and final day in the drill cut out creation Safety , Quality , Efficiency in that order is my decision making formula for working underground. -Every time I think I am starting to get good at something another year goes by and I look back and think, "man I had so much to learn back then".
Day #2 Bolt - Drill - Blast
Переглядів 2 тис.2 роки тому
Day #2 in the creation of a long hole drill cut out slot. Just enough time in the day to cycle a 3.8 Meter round. Unfortunately I was not able to get any footage of the wash down muck out but I assure you it did happen :) Every time I think I am starting to get good at something another year goes by and I look back and think, "man I had so much to learn back then".
Day #1 Side winder with sandvik DD422i jumbo
Переглядів 1,3 тис.2 роки тому
This was the first round taken to start a slot for a long hole drill. There were a lot of questions about what exactly was going on in "3 day cycle" video, I thought it would be good to go through the video in parts and explain a little bit about what's going on. Every time I think I am starting to get good at something another year goes by, I look back and think, "man I had so much to learn ba...
3 day cycle. Drill cut out from start to finish
Переглядів 22 тис.3 роки тому
3 day cycle. Drill cut out from start to finish
Sandvik DD422i jumbo full round + 2x slashes
Переглядів 4,2 тис.5 років тому
Sandvik DD422i jumbo full round 2x slashes
Sandvik DD422i partial Nav & Sidewinder
Переглядів 10 тис.5 років тому
Sandvik DD422i partial Nav & Sidewinder
Bolt power tunnel and tail race narrated
Переглядів 2,9 тис.6 років тому
Bolt power tunnel and tail race narrated
Drill:Bolt power tunnell , Tram : bolt tail race bench
Переглядів 7916 років тому
Drill:Bolt power tunnell , Tram : bolt tail race bench
Muck GG 2 scoops to remuck post breakthrough
Переглядів 9956 років тому
Muck GG 2 scoops to remuck post breakthrough
Wooow! En mis 16 años como perforista nunca vi ese movimiento.. que maniobra!!!! Debes hacer un tutorial sobre esa forma de perforación .🤣🤣🤣 👏👏👏👏👏👏👏👏
rock drill tools factory
Great video we use 421 it posible to show us proper how to configure ?
It is similar but not the same. the biggest thing with 421 is keeping stable rotation pressure
@@JoryDion copy that and what is the difference between them and 420
Great videos!
Glad you enjoy
You'd think that things were the same all round but your bag is different from the DAMOS stuff we use in Western Australia - we don't have no hoops in the bag here. And you run your catenary wire different too - we normally tension it up by spinning a stubbie bolt in it and securing it with a couple of minsup clips, or in the old days an L Pin - you've got that flash looking plastic coated thing to do it for you - neat. Do some more video's you old hack - congrats on the 20 years thing ya old dawg!
We used to use a stubby bolt but they need the minsup clips or some guys even use tape to keep them from unspinnibg . The plastic looking thing is coated in rubber and electricians use it to hang cable and clip nicely into the mesh. I plan on making some videos but as a trainer for the orange OEM typically it's other guys who are learning on the controls.
@@JoryDion Copy copy.
I've ran a 100 hp slusher, In a iron ore mine. We had a lot of them on each level.LONG HOLE DRILLER.
Put some teeth on that bucket.
Ya that was like 20 years ago lol. Teeth would have been nice but not highest priority
Drill Rig operator from South Africa here Hope you still drilling or shift supervisor by now Good work nice too watch some one els from different mines do it
@@rouchevonplaster4945 I help drillers get better now and help mine's help their drillers
I love drilling but dont have experience , just certificates
@@user-oz4yw5ne2x how do you have certificates with no experience?
Got anymore video?
@@holdenv8cars748 hopefully soon . Change of career path . Treading lightly until approval
Que pasa si te atasca el barreno en un taladro ?
I won’t let that happen
U guys use screen pusher or just the good old wrench in the chuck
Ya wrench in the chuck is usually all we have available..or I'll just use a longer steel and not bother pushing screen at all
Помню как работал с перфоратором😊спасибо.
Thanks for sharing
All I have to show for using one of these is a bad case of white hand
Gotta get the thick orange monkey grips. Also I try to not hold it as much as possible 😆
I’m excited to learn the jack leg. I volunteer at a mine when I have the free time for an older gentleman and he’s teaching me the ropes. Next time go in is jackleg time
Have fun and don't be afraid to get wet
Fantastic videos and narration! We should connect as my company is building some phenomenal tech to improve efficiencies and safety of these headings.
Send me an email
When I say I want to go mining, this is what I mean
Nunca vi instalação de tirante manual assim hahaha... Apenas com equipamento Jumbo
Just an odd question but I drill sidewinders with booms and steel facing the cab instead of up and down. So my question it how do u put both booms in the cut? Should add tho that I’m using a 282 atlas copco any feed back is appreciated! Thanks In advanced
That trick works for most jumbos . 282 is the same method .
Just an odd question but I drill sidewinders with booms and steel facing the cab instead of up and down. I So question it how do u put both booms in the cut?
Just an odd question but I drill sidewinders with booms and steel facing the cab instead of up and down. I So question it how do u put both booms in the cut?
Just an odd question but I drill sidewinders with booms and steel facing the cab instead of up and down. I So question it how do u put both booms in the cut?
Just an odd question but I drill sidewinders with booms and steel facing the cab instead of up and. So question it how do u put both booms in the cut?
Swap the booms for the cut . Take the bottom boom and put it on top and the top boom and put it on the bottom so the drill steel of each boom is very close and right ontop of each other .
Ahhh ok I had thoughts of doing it never tried it yet but is there any issues with stinger pads being to close?
@ScottHooker-nm3mp depends how tight you want the cut. Usually I’ll use the stinger pads to help measure the burden. Typically you will be drilling 43-38mm bits. Can afford to have your cut spread out more then old jack leg cut . For some reason the pads are to big you can just drill different holes at different times and they can still both be on the cut drilling at the same time
Hmmmm very true I’m gonna try what u said swap the booms… has to be better then one boom drilling the whole cut!
@@ScottHooker-nm3mp absolutely I hate watching 1 boom idle
What mine are you at I work at Creighton mine as a beat mechanic
I travel around Canada helping the less fortunate.
Should always put your screen first that way you won’t get kloberd
I agree.
Just as the nut cracked too. Lol, at least your using canun
Ya it was time to send that one to the shop lol.
Que modelo es ?
DS 411
De que mina es y la ciudad ? Por favor.
Buen video. Me interesa más los vídeo del ds411 el boltec pernador.
Can you please teach me how to connect the machine
Air in the top water in the bottom 🤷♂️
Buenas tardes. Excelente. Tienes mas cideos. Me interesa. Opero boktec y proximo llegara un sanvick a la empresa. Me gustaria ver mas. Ya que en youtube es poco lo que hay de este modelo. Por ejemplo operar dentro de la cabina sobre las funciones de los joytick y demas
I have some videos that show inside the cab. What model # are you getting ?
Excelentes videos, gracias por compartir tus experiencias y asi aprendo mi ingles minero, Muchos saludos desde Perú.
Wombat much quicker
what's a wombat? Keep in mind I don't get a choice of what gear I run . I just use what the company has lol
Slow progress how much advance 24hours .howhigh is the coal is it long wall or boared and pillar 😊
Not coal at all. 8.5x8.5 in most areas. Some.larger some smaller This is a hydro tunnel no coal in site
Im a jumbo operator from Ghana but i use a single boom jumbo without screens. I wiuld love to use your machine one day. I use the DM801HDE from SANDVIC. Im impreesed wacthing you 😊
Why don't you have any outsider to help you check your patterns? 8:37
we are spread very thin. We have no offsiders or help. One man show
Do you with water or just air?
Both
@@JoryDionI work for a shoring company, we're currently doing 3.3 meter holes on a 15° downwards angle. If I'm correct a jack leg is designed for flat drilling or upwards correct? 😅 It's literally killing my body doing this.
@@mitchellmacdonald6897 no we do -15 or more even. For some help you can drill a steel straight down and then chain your foot to it. Then use the air leg retract button to help pull the machine out. Or use a steel ladder
@@JoryDion Im finding my mojo now, I'm also in a man basket 85 feet in the air, appreciate the insight, and be safe!
💋 *promo sm*
2 guys on a scissor deck with a few stopers is way faster IMO. Although I would much rather run a maclean lol.
Expierenced MacLean operator will be drinking coffee and napping before you finish with 2 guys on a deck
We used to do this in the 50s and 60s. In some parts they still do. We dont use winches for cleaning anymore
Ya this is pritty old school for sure
Recommend as a job?
Ugh. I've never been much of a hand at putting up vent but I'll tell you what I'm amazingly good at catching it on a boom or the roof of the cab and tearing it down. We all have our gifts :-)
This is the best comment 😆
Glad to see you posting again! We've missed your underground adventures!
Just old stuff I have recorded now from ages ago that I never released
What mine are you working at ? In Ontario ? I want to work at a mine like yours that lets you get away with this kinda jackpot work
Lol this is really old. Jackpot work isn't good
This is why some people say “slusher knots don’t work” haha
I wanna see a stope mucking full cycle Jory … thank you
That would be a cool time lapse. I haven't been to involved in any producttion
You've become one very skilled miner, I dare say you could get hired anywhere.
Thank you
I applied for this position and here I am watching how to operate machines 👍🏻💯
Не по русски плохо эта сетка барохло
Makes me wonder some times those high ballers. One drill going. Lift the deck
There was 2 drills going ....it's not that high 🤷🏼♂️ and the railings where in the way so we couldn't be that high on the deck or angle of leg hits the railing
😢😢😢
dont cry all in good fun
This popped up on the top of my UA-cam feed and before I fully read it I thought it said “bolting with dd422” when are we getting that Jory?
I’d love to . Will have to wait and see